Bicycle rack in Danish design by DESIGNIT is available in black for 5 bicycles
The DIAN bicycle rack at Aarhus University
Galvanized single-sided bicycle rack is seen with bicycles
Wall-mounted bicycle rack DIAN
Double-sided bicycle rack at Aarhus University
Modular bicycle rack stands in front of educational institution

DIAN Bike Rack

Design DESIGNIT A/S

Our DIAN bicycle rack is a very straightforward design with a large front-wheel holder that is almost a semicircle. The large curves give DIAN an expansive, airy look in urban spaces or beside building entrances. When the rack is supplied as a double-sided model, the curves reflect one another, creating an elegant complete circle.

DIAN has been created by design firm DESIGNIT, providing a bicycle rack with the emphasis on style and expression. It enhances its surroundings, with a focus on aesthetics, architecture and quality. It can be coated in any RAL colour, to more closely match with a particular design concept or style.

Designer bicycle rack with integral functionality and durability

Furthermore, DIAN provides the same high degree of functionality and durability as our other bicycle racks.

In terms of functionality, the wheel holders on DIAN open out slightly, so the rack can accommodate all tyre thicknesses. It is essential to install DIAN at the right height from the ground, so the wheel holder grips the tyre in two places.

In terms of durability, the wheel holders are made from 16mm-thick steel, providing a solid and robust rack that will stand up to urban use. The rack is hot-dip galvanised for rust protection and to extend its useful life. Any powder coating is then applied on top as additional protection against rain, salt, etc. The paint will become worn over time, but can be refreshed if needed.

Bicycle rack with DGNB compliant dimensions

DIAN is available as single-sided modules with 5 or 6 spaces or double-sided modules with 10 or 12 spaces. The modules can be combined. There is a 50 cm gap between wheel holders as standard. We can also supply DIAN with a 60 cm gap as recommended under the German DGNB sustainability certification, which is comparable to BREEAM.

The wheel holders can be wall-mounted or supported by bollards (embedded or bolted to the ground). We use a relatively thick bollard as standard (Ø 114 mm) with a shallow conical top that is in keeping with the overall look of the bicycle rack.

DIAN can be installed at an angle to save on depth.

Here at HITSA we have extensive experience of planning and installing bicycle parking. We are happy to provide advice on how to make the most of the space available for your bicycle parking facility – whilst also ensuring an attractive appearance. Get in touch with our consultants for a plan or drawing to fit your requirements.

We manufacture our products in-house at our own facilities in Kolding and Latvia. This means that we can adapt and customise products as required to suit customer needs.

Contact us

Call us
Tel: +45 7557 4155

E-mail us at
hitsa@hitsa.com

Downloads

Technical drawings See drawings

DIAN BIKE RACK

• Single or double-sided bike rack
• Angled clamps that suit all types of tyre
• Allows room for lights on front wheel fork
• Modular, so can be assembled in the length required
• Available vertical (90°) or angled (45°)
• Also available as an individual stand (Snap or wall)
• Also available in any RAL colour

MATERIALS:

• Hot-dip galvanised steel
• Also available in powder-coated, hot-dip galvanised steel

DIMENSIONS:

Columns, DIAN: Ø114 mm
Columns, Snap: Ø42 mm
Bars: Ø33 mm
Clamps: Ø16 mm
Standard distance between clamps: c/c 500 mm
Also available: c/c 600 mm

MODULE SIZES:

• Single-sided: 3, 4, 5 or 6 parking spots
• Double-sided: 6, 8 or 10 parking spots

INSTALLATION:

• Available for embedding or bolting to the foundation or wall mounting
• Recommended base dimensions: Ø300 x H:600 mm
• Distance from ground to middle of clamp: 250 mm
• Distance from ground to lower edge of clamp: 110 mm

DIAN drawings

DIAN

Modular bike rack

  • 01_DIAN - tegning - 1

DIAN E

Single-sided: 3, 4, 5 or 6 parking spots

  • 02_DIAN E - tegning - 1

DIAN ES

Single-sided: 3, 4, 5 or 6 parking spots, angled (45°)

  • 03_DIAN ES - tegning - 1

DIAN D

Double-sided: 6, 8 or 10 parking spots

  • 04_DIAN D - tegning - 1

DIAN DS

Double-sided: 6, 8 or 10 parking spots, angled (45°)

  • 05_DIAN DS - tegning - 1

DIAN V

6 parking spots, for wall mounting

  • 06_DIAN V - tegning - 1

DIAN VS

6 parking spots, for wall mounting, angled (45°)

  • 07_DIAN VS - tegning - 1

DIAN VE

Individual stand, wall

  • 08_DIAN VE - tegning - 1

DIAN VES

Individual stand, wall, angled

  • 09_DIAN VES - tegning - 1
Forgot your password?

|