LARGO Bicycle Bollard

Design HITSA

The LARGO supports the bike in its own unique way. It winds around the front fork, keeping the bike very stable and secure. At the same time it gives the cyclist multiple options for securely locking their bike by its frame.

The organic shape is formed by a single length of tubular steel that rises up from the ground, winds around in a fluid configuration and then disappears back down into the ground again. This makes LARGO an appealing bicycle stand that adds an elegant touch to the urban landscape. Long rows of LARGO stands provide an attractive, repeating winding pattern.

With its distinct silhouette, LARGO is also a stand calling out for colour. We can apply a powder coating, in any RAL colour, at our painting facility in Kolding, Denmark.

Bicycle stand for easy installation on shared base plate

LARGO can be supplied for cementing in. This allows great freedom with regard to positioning if the site calls for a particular form of bicycle parking.

In addition, LARGO is available as modules for easy installation. For single-sided parking, LARGO is available in modules with 3, 4 or 5 parking spaces on one base plate, while double-sided modules have 6, 8 or 10 spaces per plate. The plate does not need to be cemented in. It simply needs to be set into a 15cm-deep trench, and then covered with gravel or soil before tamping down. And finally replace the grass or other surface layer over the plate.

The stands are staggered in the double-sided version, so the bikes overlap. So our double-sided LARGO bicycle parking saves on depth.

Easy-to-maintain bicycle stand

LARGO is made from 32 mm hot-dip galvanised tubular steel. If the product is supplied with a powder coating, this is always applied on top of a hot-dip galvanised surface. This provides two layers of protection against rust. LARGO is an extremely durable bicycle stand, resistant to all kinds of weather.

Here at HITSA we have extensive experience of planning and installing bicycle parking. We are happy to provide advice on how to make the most of the space available for your bicycle parking facility – whilst also ensuring an attractive appearance. Get in touch with our consultants for a plan or drawing to fit your requirements.

We manufacture our products in-house at our own facilities in Kolding, Denmark, and Latvia. This means that we can adapt and customise products as required to suit customer needs.

Contact us

Call us
Tel: +45 7557 4155

E-mail us at
hitsa@hitsa.com

Downloads

Technical drawings See drawings

LARGO BICYCLE BOLLARD

• Single rack with option of locking bicycle
• Half of the bicycle is rolled into the stand
• Available on a track with 3, 4 or 5 parking spots if single-sided and 6, 8 or 10 parking spots if double-sided
• Also available in any RAL colour

MATERIALS:

• Hot-dip galvanised steel
• Also available in powder-coated, hot-dip galvanised steel

DIMENSIONS:

Clamps: Ø32 mm

INSTALLATION:

• Single rack is embedded
• Track-mounted racks are fitted 150 mm below ground – embedding is not necessary
• Recommended distance: c/c 500 mm
• Recommended base dimensions: Ø300 x H600 mm
• Distance from ground to upper edge: 825 mm

LARGO drawings

LARGO

Bicycle bollard with easy installation

  • 01_LARGO - tegning - 1

LARGO E

Single sided with room for 3, 4 or 5 bikes

  • 02_LARGO E - tegning - 1

LARGO D

Double sided with room for 6, 8 or 10 bikes

  • 03_LARGO D - tegning - 1
Forgot your password?

|