NOLI Bike Rack

Design HJØRRING KOMMUNE

Our NOLI bicycle rack is based on our classic NOAH rack. NOLI features the same sturdy quality and simple design as NOAH. The difference is that the NOLI wheel holders curve inwards, allowing space for lights and other equipment attached to the wheel hub.

NOLI is a solid bicycle rack that is easy to maintain.

The half-moon-shaped wheel holders are made from 16mm-thick steel tubing. They are therefore more robust than thinner racks to stand up to the rigours of an urban environment, such as late-night revellers, boisterous football fans and more.

The struts are inserted into tubular sockets on the bollards, so they can easily be replaced. Once the bollards are embedded in the ground, the struts are inserted into the connectors and secured. This makes NOLI a flexible bicycle rack, with struts and wheel holders that can be replaced without any problem.

Bicycle rack in DGNB compliant dimensions

The NOLI wheel holders can be attached to struts, a wall or stand-alone SNAP bollards. SNAP is a good way of making use of a corner location or other confined space. SNAP or a rounded bollard rack also allows the bicycle parking installation to follow the curves of a flower bed or pavement.

The holders can be set at an angle to save on depth and width. The distance of 50 cm between wheel holders ensures that handlebars do not become entangled. We can also supply NOLI with a 60 cm gap (CC600) as recommended under the DGNB sustainability certification, which is comparable to BREEAM.

The struts can be attached to a number of different bollards. If installing NOLI in an area with pedestrian and bicycle traffic only, a standard Ø89 mm bollard may be the appropriate choice. If installing it in a street or car park location with motor traffic, you can use a more robust Ø114 mm bollard with space for reflective markings, for example in a design like LENTA 114.

The rack is available as single-sided modules with 5 or 6 parking spaces or double-sided modules with 10 or 12 spaces.

Bicycle racks for all types of tyres

Our NOLI bicycle rack is suitable for all tyre thicknesses from racing bikes to granny bikes and mountain bikes. This is thanks to the fact that the wheel holders are angled outward. The tyre is held in two places, so that the front wheel remains steady and does not jiggle in the holder.

All racks of this type are hot-dip galvanised and therefore require no maintenance. In addition, the rack can be powder-coated, so the colour and style coordinate with the design concept of the particular business, housing association or municipality. Powder coating provides an extra layer of protection against rust. However, paintwork is likely to become worn from bicycle tyres being pushed in and out, but it can be refreshed if needed.

NOLI can be combined with our TRIANGEL lock bracket or LOCKT lock bracket, making it easy for cyclists to lock their bike frame securely to the rack.

Get NOLI bike racks as a HITSA-SAFE product for hostile vehicle mitigation

Our NOLI bike rack is available as a HITSA-SAFE bike rack for hostile vehicle mitigation. HITSA-SAFE offers familiar urban furniture with a Nordic look, which is certified for hostile vehicle mitigation according to PAS 68 and IWA 14.

Contact us

Call us
Tel: +45 7557 4155

E-mail us at
hitsa@hitsa.com

Downloads

Technical drawings See drawings

NOLI BIKE RACK

• Angled clamps that suit all types of tyre
• Modular, so can be assembled in the length required
• Available vertical (90°) or angled (45°)
• Also available as an individual stand (Snap)
• Optional extra: TRIANGEL or LOCKT lockable bracket
• Also available in any RAL colour

MATERIALS:

• Hot-dip galvanised steel
• Also available in powder-coated, hot-dip galvanised steel

DIMENSIONS:

Columns without groove: Ø89 mm
Columns with groove: Ø114 mm
Columns, Snap: Ø42 mm
Bars: Ø33 mm
Clamps: Ø16 mm
Standard distance between clamps: c/c 500 mm
Also available: c/c 600 mm

MODULE SIZES:

• Single-sided: 3, 4, 5 or 6 parking spots
• Double-sided: 6, 8 or 10 parking spots

INSTALLATION:

• Available for embedding or bolting to the foundation or wall mounting
• Recommended base dimensions: Ø300 x H600 mm
• Distance from ground to middle of clamp: 350 mm
• Distance from ground to lower edge of clamp: 175 mm

NOLI drawings

NOLI

Modular bike rack

  • 01_NOLI - tegning - 1

NOLI 2

Bike rack with 3 & 4 parking spots

  • 02_NOLI 2 - tegning - 1

NOLI 3

Bike rack with 5 & 6 parking spots

  • 03_NOLI 3 - tegning - 1

NOLI E

Single-sided 3, 4, 5 or 6 parking spots

  • 04_NOLI E - tegning - 1

NOLI ES

Single-sided 3, 4, 5 or 6 parking spots, angled (45°)

  • 05_NOLI ES - tegning - 1

NOLI D

Double-sided 6, 8 or 10 parking spots

  • 06_NOLI D - tegning - 1

NOLI DS

Double-sided 6, 8 or 10 parking spots, angled (45°)

  • 07_NOLI DS - tegning - 1

NOLI V

For wall mounting

  • 08_NOLI V - tegning - 1

NOLI VS

For wall mounting, angled (45°)

  • 09_NOLI VS - tegning - 1

NOLI VE

Individual stand for wall mounting

  • 10_ NOLI VE - tegning - 1

NOLI VES

Individual stand for wall mounting, angled (45°)

  • 11_NOLI VES - tegning - 1

NOLI SnapE

Individual stand for embedding

  • 12_NOLI SnapE - tegning - 1

NOLI SnapD

Double-sided stand for embedding

  • 13_NOLI SnapD - tegning - 1

See project with NOLI

Se project here
Forgot your password?

|